Simucube 50.8 mm to 70 mm Adapter

Fit a 50.8 mm Wheel to the Link Quick Release

The Simucube 50.8 mm Adapter lets third-party steering wheels with a 50.8 mm bolt pattern mount to the Link Quick Release. So wheels you already own are not stranded when you move to Simucube 3.

The Link Quick Release uses a 70 mm pattern. However, plenty of wheels use 50.8 mm instead. Therefore this adapter bridges the two.

30 mm of Extra Clearance

It also works as a spacer. Because it adds 30 mm of depth, shifter paddles get room to clear the quick release and the base behind it.

That matters on wheels with long paddles. As a result, a wheel that would otherwise foul the QR becomes usable.

Wireless Still Works

Wireless power and data transfer carry through the adapter. So a Simucube Link compatible wheel keeps running cable-free at the new depth.

A third-party wheel without Link support will still need its own connection, as it would on a bare Link Quick Release.

Threaded or Not

The adapter works with both threaded and non-threaded mounting holes. In addition, both screw lengths are in the box, so you do not need to source hardware to suit your wheel.

What's in the Box

• Simucube 50.8 mm to 70 mm adapter
• 3x M5x30 hex head screws
• 3x M5x12 hex head screws

Fitting the Simucube 50.8 mm Adapter

This fits the Link Quick Release for Simucube 3 and most steering wheels using a 50.8 mm mounting pattern. The quick release itself is not included.

Why Buy From Apex Sim Racing

Apex Sim Racing is an authorized Simucube retailer in the United States. So every order ships with full US warranty coverage and US-based technical support. In short, backed by 25,000+ orders shipped.

Complete Your Setup

Need the quick release? The Link Quick Release for Simucube 3 is here.