Apex Sim Racing GT Bundle
- 12Nm direct drive, 21-bit encoder, 20KHz response
- 100kg load cell brake, CNC aluminum pedal frame
- SimPro Manager and SimHub RGB, QR50 and dual paddles included
The Apex Sim Racing GT Bundle is an Alpha EVO 12Nm bundle built for GT and endurance racing. It pairs the Simagic Alpha EVO 12Nm wheelbase with the Neo X 310G steering wheel and the P1000-F 2-pedal set. The base and wheel both configure in SimPro Manager, so tuning happens in one place.
Alpha EVO 12Nm wheelbase
The Alpha EVO runs Simagic's ultra-low inertia servo motor with zero-cogging tech and a 21-bit encoder. Peak torque sits at 12Nm, between the 9Nm EVO Sport and the 18Nm EVO Pro. The Pro is 36mm longer and about 2.4kg heavier, so the 12Nm keeps the compact chassis. Simagic matched its DFDF filter to the new motor, and active cooling holds full torque through long stints. Quick release support covers QR50, QR70, and QR-A.
Neo X 310G steering wheel
The Neo X 310G pairs Simagic's Neo X hub with a 310mm GT rim. The rim uses a one-piece CNC aluminum frame in black synthetic leather with orange stitching, and dual paddle shifters come standard. The hub carries the controls:
- 8 customizable RGB buttons and 9 programmable RGB rev lights
- 2 programmable LED encoders and 2 thumb encoders
- 2 seven-way switches
- 2.4G Wi-Fi connection
- Simagic QR50 quick release included
RGB colors and effects are set in SimPro Manager or SimHub, and each button needs 500g to trigger, which helps prevent accidental presses.
P1000-F 2-pedal set
The P1000-F is a two-pedal throttle and brake set with no clutch. The brake uses a 100kg load cell, while the throttle runs a Hall angle sensor, both at 12-bit (4096) resolution. Travel, brake spring force, pedal angle, linearity, and deadzones are all adjustable. It connects over USB to a PC or directly to the CAN-Bus port on a Simagic wheelbase. You can add Haptic Pedal Reactors later if you want brake and throttle feedback.
Mounting the Alpha EVO 12Nm bundle
The base bottom mounts out of the box, and optional brackets add side, front, and desk mounting. Keep in mind that the front bracket disables the base's magnetic connectivity. The P1000-F measures 334.8 x 336 x 267mm, so check your pedal deck space before ordering.
