Simagic Zeus compatibility guide: which accessories do you actually need?
Simagic Zeus compatibility guide: which accessories do you actually need?
The Zeus Series is Simagic's most capable steering wheel platform yet — but the accessory ecosystem trips up even experienced sim racers. Here's exactly what you need based on your setup.
Launched at SimRacing Expo Charlotte in May 2026, the Zeus Series introduces a modular platform that works across Simagic's Alpha EVO bases, original Alpha bases, and third-party wheelbases. The headline idea is simple: one MagicDash 4 display that snaps in and out of any Zeus wheel, so if you own multiple wheels you don't need a separate dash for each one. That's a genuinely smart concept — but the accessory picture surrounding it trips up a lot of buyers.
This guide covers every configuration: Zeus wheel only, Zeus wheel with MagicDash 4, and MagicDash 4 as a standalone cockpit display. By the end you'll know exactly what to add to cart — and what you don't need.
Meet the Zeus Series
Three wheels, one platform. The Zeus Formula ($499), GT ($349), and Sport ($329) each target a different driving style but share the same accessory ecosystem and MagicDash 4 compatibility. Buy one dash and move it between all three.
What each accessory does
Before the tables, a quick plain-English breakdown of each accessory so the logic makes sense:
- Plug and play Zeus wheels connect natively to Alpha EVO bases via the EVO's internal USB pass-through. Nothing extra to buy.
- AirLink Wireless module for Alpha EVO bases. Required any time MagicDash 4 is involved on an EVO setup. It bypasses the EVO's internal USB slip ring and uses Simagic's own WiFi connection instead — this is counter to the EVO's original "no add-ons" goal but is apparently necessary for the most stable dash connection. SimHub note: AirLink gives you SimHub on the dash, but wheel LED control stays within SimPro Manager. For full SimHub LED control of the wheel, use Maglink Pro instead.
- Maglink Pro Wired connection for third-party bases and original Alpha bases. Handles power and data for the Zeus wheel and/or MagicDash 4. Important: Maglink Pro requires a MagLink plate to be physically installed on the Zeus wheel itself — the wheel is not stock when using this. Also unlocks full SimHub LED control of both the wheel and dash.
- Maglink Pro Xtend For original Alpha series bases only (Alpha, Alpha Ultimate, Alpha Mini, M10). Works differently to Maglink Pro — it's effectively a USB pass-through via coiled active USB cable rather than an internal slip ring. The Zeus wheel stays completely stock with no plate installation needed. One Xtend covers multiple Zeus wheels on the same base, so you don't need to modify each wheel individually. Also works with Simagic's QR-A when installed on a third-party base. Note: adds meaningful length to the wheelbase stem.
- MagDock Physical mount and connection hub for the MagicDash 4 when used without a Zeus wheel. Once you have a Zeus wheel, the dash mounts to the wheel directly — MagDock isn't needed.
- QR-A For the reverse scenario: mounting a third-party steering wheel onto an Alpha EVO base. Not needed for Zeus wheels on an EVO base — that's plug and play.
- USB-C (rear port) There is a USB-C port on the back of every Zeus wheel, but this is for firmware updates only — not a primary day-to-day racing connection.
Find your setup
Identify your scenario, then check the row for your wheelbase type.
Zeus wheel only
No MagicDash 4 attached.
Zeus wheel + MagicDash 4
Dash snaps onto the wheel while you drive.
MagicDash 4 standalone
Dash mounted to rig or base — no Zeus wheel.
Scenario 1 — Zeus wheel only
No MagicDash 4| Your base | What you need | Notes |
|---|---|---|
| Alpha EVO series | Plug and play | Connects natively — no accessories required.
EVO Sport, EVO, EVO Pro.
|
| Original Alpha series | Maglink Pro Xtend | Original Alpha can't power or communicate with Zeus natively.
Wheel stays stock — no plate installation needed. Covers multiple Zeus wheels on one base. Alpha, Alpha Ultimate, Alpha Mini, M10.
|
| Third-party base | Maglink Pro | Handles power and data between Zeus and your base.
Requires MagLink plate installed on the Zeus wheel. Moza, Fanatec, Asetek, VRS, Cammus. See QR note below.
|
Scenario 2 — Zeus wheel + MagicDash 4
Dash snaps to the wheel — no MagDock needed| Your base | What you need | Notes |
|---|---|---|
| Alpha EVO series | AirLink | One wireless accessory covers both the wheel and the dash.
SimHub supported on the dash. Full SimHub wheel LED control requires Maglink Pro instead of AirLink.
|
| Original Alpha series | Maglink Pro Xtend | Wired through the base. Dash still snaps onto the wheel magnetically.
Wheel stays stock — no plate installation needed.
|
| Third-party base | Maglink Pro | Wired through the base. Dash still snaps onto the wheel magnetically.
No MagDock required. See QR note below.
|
Scenario 3 — MagicDash 4 standalone
No Zeus wheel — dash mounts to rig or base via MagDock| Your base | What you need | Notes |
|---|---|---|
| Alpha EVO series | AirLink | Wireless. EVO has a built-in front mount — no MagDock needed.
Works alongside a Zeus wheel or without one.
|
| Original Alpha series | MagDock | Provides both the physical mount and wired connection. Includes Maglink Pro Hub. |
| Third-party base | MagDock | Requires front mounting holes on your base. Includes Maglink Pro Hub.
Fanatec, Moza, Asetek, VRS, Cammus, and others.
|
A few things worth knowing
SimHub LED control depends on how you connect. This is the detail most people miss. If you're on an EVO base using AirLink, the MagicDash 4 fully supports SimHub — but the wheel's own LEDs are controlled through SimPro Manager, not SimHub. If you want full SimHub control over both the dash and the wheel LEDs, connect via Maglink Pro instead of AirLink. For most sim racers SimPro Manager's LED control is more than enough, but if SimHub is a hard requirement for your setup, factor this in.
The Zeus Formula looks different without the dash. When the MagicDash 4 is removed, the Formula loses its main top LED strip — the dash slot sits empty and the wheel looks noticeably unfinished. The GT and Sport both retain their LED strips regardless of whether the dash is fitted, so they work as complete wheels with or without the display. Not a dealbreaker, but worth knowing before you buy the Formula without a dash.
Maglink Pro Xtend adds length to your stem. One Xtend can cover multiple Zeus wheels on the same Alpha base (a cost-saving compared to one Maglink Pro per wheel), but it adds meaningful physical length to your wheelbase stem. Depending on your monitor distance and rig setup, this could push your wheel further forward than expected. Check your clearances before ordering.
MagDock magnetic hold on EVO is light. When the MagicDash 4 is mounted directly to the front of an Alpha EVO base via AirLink (Scenario 3), the magnetic retention is fairly light and the dash can be nudged by hand. On a static rig this is unlikely to cause issues, but if you're running a motion platform or aggressive transducers, keep an eye on it.
Common questions
Shop the Zeus Series
Not sure which accessories you need?
Tell us your wheelbase and we'll confirm the right setup before you order.
https://www.apexsimracing.com
Leave a comment