The base set is the throttle and brake pedals, a toolkit and a warranty card. The clutch is sold separately.
The SRP2 connects directly to a PC over USB. MOZA says it works with all sim racing brands, not only MOZA gear.
Yes. The SRP2 Clutch Pedal is an add-on for the SRP2 series only. MOZA says it is not compatible with the R3 or R5 simulator series or the SRP Lite2.
It uses a hybrid of a 0 to 100 kg load cell and a 15-bit angle sensor. The angle sensor covers early travel and the load cell covers later travel.
The brake ships with elastomers for 25 feel configurations. The optional Performance Kit expands this to over 1,000 setups. The brake engagement point is also adjustable.
Pedal face angle has two stages (10 or 25 degrees), spacing is plus or minus 15 mm, and height adjusts over 36 mm. They can go on a cockpit, a stand or the floor, with anti-slip pads on the base.
Use Set Min and Set Max on the Pit House main page, or recalibrate and adjust stroke on the pedal function page.
Use a stable USB port and confirm they appear under Windows USB Game Controllers. Replug the USB and check the sensor signal lines are in the correct control box sockets.



Connects directly to PC over USB. Moza states the pedals work with other sim racing brands as well as the full Moza wheelbase lineup. Configured in Moza Pit House. Mounts to a cockpit or stand, or sits on the floor with the anti-slip base pads; an optional rear support bracket adds stability.

















Moza Racing R3 Xbox / PC Sim Racing Bundle 3.9nm$339.00Wheelbase + Mount + Wheel + Pedals
New
Wheelbase + Mount + Wheel + Pedals
Simagic 9Nm Green Flag Bundle$599.00Wheelbase + Wheel + Pedal
Moza Racing Wheelbase & Steering Wheel BundleFrom $539.00Wheelbase + Wheel + Pedal
Simagic EVO Pro 18Nm Base 3-Piece BundleFrom $1,627.00Wheelbase + Wheel + Pedal
Simagic Ultimate Bundle$1,899.00Wheelbase + Wheel + PedalBuild within a single brand ecosystem. The more components you add, the more you save.
Need help choosing? Take our brand quiz →Built, tested, crate-shipped to your door
Custom build Build your own full custom system Work with our specialists on a bespoke rig. Request a quoteThe Moza SRP2 Pedals are a two-pedal load cell set built on high-strength steel. The brake uses a 100kg load cell paired with a 15-bit angle sensor. So the pedal reads both how hard you press and how far you travel.
Moza blends the two signals with a sensor fusion algorithm. As a result, the early travel behaves like an angle sensor and the later stages respond to pressure.
The brake ships with three elastomer springs. Because they stack in different orders and combinations, Moza counts 25 configurations from the included parts alone.
The optional Performance Kit expands that to over 1,000. In addition, brake pressure engagement point adjusts in software.
Moza designed the force adjustments to be tool-free. Therefore you can change brake feel by hand between sessions rather than stripping the pedal down.
Pedal travel curves, sensitivity and mode switching all adjust in Pit House. Meanwhile a real-time output display shows exactly what the game receives. So you can set a bite point and confirm it rather than guessing.
The pedals sit on the floor or bolt to a cockpit or stand. Anti-slip pads on the base reduce movement. However, on a hard floor under heavy braking, the optional rear support bracket is worth adding.
They connect directly to a PC over USB. Because the connection is standard USB, Moza states they work with other sim racing brands and not only Moza bases.
Apex Sim Racing is an authorized Moza Racing retailer in the United States. So every order ships with full US warranty coverage and US-based technical support. In short, backed by 25,000+ orders shipped.
Add the SRP2 Clutch Pedal for three pedals, the CRP2 and SRP2 Performance Kit for more brake range, or the SRP2 Rear Support Bracket for floor use.
