A Complete Rig Built for the Long Haul
The R5 Pro Truck Simulator is a full trucking setup in one box. It pairs the R5 Pro direct drive wheelbase with the 400mm TSW Truck Wheel and SRP Lite2 pedals.
Trucking sim is a different job to racing. You sit for hours holding a heavy vehicle steady, instead of chasing a lap time. So this bundle uses a full-size truck wheel and a base that stays consistent through a long run.
What's Included
-
Moza R5 Pro Wheelbase: 6Nm direct drive, 21-bit magnetic encoder, 600MHz CPU, NexGen Force Feedback Algorithm 5.0
-
Moza TSW Truck Wheel: 400mm standard-size truck wheel, microfiber leather with hand stitching, aerospace-grade aluminum frame
-
Moza SRP Lite2 Pedals: two-pedal throttle and brake set, high-strength steel, contactless Hall sensors
- Table clamp, power adapter, power cord, USB cable, toolkit, manual and warranty card
6Nm of Constant Torque
Moza puts the R5 Pro at a 9.1% torque increase over the previous generation. That gives a loaded trailer real weight through the wheel. In addition, there is enough detail left to feel road surface, camber and the moment the trailer starts to push.
21-Bit Magnetic Encoder
Over two million resolution points, which Moza states is 64 times the previous generation. On a long straight haul, that resolution matters. Because the small corrections register cleanly, you keep the rig tracking without sawing at the wheel.
The 400mm TSW Truck Wheel
This is a standard-size truck wheel, not a scaled-down racing rim. So hand position and steering input match what a real driver does. Microfiber leather with hand stitching covers an aerospace-grade aluminum alloy frame.
RGB backlit buttons, customizable RPM LEDs, thumbwheels and joysticks sit within reach. Also, an all-aluminum quick release lets you swap to a racing rim in seconds. Angle adjustment runs from 0 to 75 degrees, so you can set a truck driving posture rather than a racing one.
NexGen Force Feedback Algorithm 5.0
Moza's latest algorithm runs on a 600MHz processor. It adds FFB interpolation and game FFB decoupling. Therefore you can tune road feel separately from the effects the game sends.
Intelligent Temperature Control
Real-time monitoring and upgraded cooling hold output steady. As a result, force feedback stays consistent through a full delivery run instead of fading after the first hour.
SRP Lite2 Pedals
High-strength steel faces and baseplate with contactless Hall sensors, so nothing wears out. Spacing adjusts 15mm left to right and 36mm in height. Meanwhile pedal curves adjust with a real-time output display.
The set also expands later with the SRP Lite2 clutch pedal and performance kits.
Mounting the R5 Pro Truck Simulator
The table clamp comes in the box for desk use. Alternatively, the base supports bottom and front mounting on a cockpit or wheel stand.
Tuning and Games
Moza Pit House handles force feedback, steering angle, pedal curves, button mapping and RGB lighting. It runs on PC or through the Moza Racing App. Supported titles include Euro Truck Simulator 2 and American Truck Simulator.
The base also carries ports for a shifter, handbrake and E-stop switch. Therefore anything you add later plugs straight in.
Why Buy From Apex Sim Racing
Apex Sim Racing is an authorized Moza Racing retailer in the United States. So every order ships with full US warranty coverage and US-based technical support. In short, backed by 25,000+ orders shipped.
Complete Your Setup
Browse the full Moza Racing range and sim rig hardware.
R5 Pro Wheelbase
Platform: PC
FFB Drive System: Direct Drive
Peak Torque: 6Nm
Peak Power: 100W
Encoder Resolution: 21 bit
Processor: 600MHz
Force Feedback Algorithm: NexGen 5.0
Max Steering Angle: 90~2700 degrees
USB Refresh Rate: 1000Hz
Housing Material: High-Strength Die-Cast Aluminum
Weight: 2.9kg
Input Voltage: 110V~220V AC to 12V DC
Connection Ports: Power, USB, Pedal, Dash, Shifter, Handbrake, E-stop
Mounting Options: Bottom, Front and Desktop Mounting
Desk Clamp: Included
TSW Truck Wheel
Size: 400mm, Standard Truck Wheel
Grip Material: Microfibre Leather with Hand Stitching
Frame Material: Aerospace-Grade Aluminum Alloy
Buttons: RGB Backlit
RPM LED Light: Customisable
Additional Controls: Thumbwheels and Joysticks
Release Method: All-Aluminum Quick Release
Angle Adjustment: Versatile, Multiple Positions
SRP Lite2 Pedals
Configuration: 2 Pedal (Throttle and Brake)
Pedal Face Material: High-Strength Steel
Pedal Base Material: High-Strength Steel
Sensor: Contactless Hall Sensor
Left/Right Adjustment Range: 15mm
Height Adjustment Range: 36mm
Pedal Curve Adjustment: Supported
Real-Time Pedal Output Display: Supported
Plug & Play PC Compatible Via USB
PC only. Built for Euro Truck Simulator 2 and American Truck Simulator, and suited to farming and utility-vehicle simulation. Tuned through Moza Pit House or the Moza Racing App. Dedicated ports accept Moza pedals, dashboards, shifters, handbrakes and an emergency stop switch.